Materials, care, and selection guidelines for cutting-resistant gloves

Given the levels of cut resistance that gloves contain, you have a greater chance of selecting the proper one for your profession. Remember that personal protective equipment is rather expensive, especially if you choose a low-quality replacement or the incorrect model. Keep this in mind when selecting a glove.

Cotton can be chosen for its higher cut resistance

It should be able to withstand adversity for an extended period so that you do not have to spend time and money on frequent replacements. Determine which materials you require. Manufacturers of protective gloves use a variety of materials and offer varying degrees of cut resistance.

Leather gloves are available, but don't expect them to be as cut-resistant as others unless they have a cut-resistant lining. If you need the most abrasion and cut resistance, consider gloves made of DYNEEMA or Kevlar.

A more perfect glove is made of the two materials mentioned but additionally improved with the use of steel fibers. Identify a specific material or blend of materials suitable for your chosen industry.

Maintenance of cut protection gloves

The way cut-resistant gloves are cared for may differ from that of standard gloves. Some of these gloves can be machine washed without being damaged. Some of them necessitate hand washing.

Almost all gloves are cut-resistant and necessitate the use of air. Avoid putting it in the dryer because it may shrink. The dryer may cause the glove to become unusable. Avoid using bleach, harsh chemicals, or fabric softeners when washing.

It is critical to check each time before using. It should look for any potential holes, weak spots, or tears. You can use soap and water to clean and wash your clothes.

Choose the right cut-resistant gloves for hand protection

Hands are the most used tool by man for their precision, agility, strength, endurance, and grip.

Gloves cut-resistant are delicate and fragile instruments that must adequately protect to avoid incurring one of the 1,400,000 hand injuries that occur on average every year due to incorrect protection. One-third of these injuries occur in the workplace, causing an economic loss of around € 15,000 each.

There are many types of gloves on the market, but it is appropriate to refer to the new European standard EN 388: 2016 to choose the correct protective gloves against mechanical risks.